CANT CONNECT DREAM BOX TO FLASH FXP OR SIMPLE FTP APP FOR DREAMBOX

[MetalKettle]

tried deleting same outcome conection failed

Your definately using a cross over cable ?

[staggers]

tx psats ive been following steps by booth uk as detailed in post if i start all over again can you tell me all settings i need to change,with the above setting using crossover cable when i click on status of lan is says limited connectivity,am i close to connecting ? is there something i need to alter,feel like i have trioed everything cheers stags

[staggers]

Your definately using a cross over cable ?

yes this is my 2nd one just incase 1st was faulty

[MetalKettle]

Have a look here mate.

Try these settings and look at the guide.

http://www.digital-kaos.co.uk/forums/f34/connecting-500c-via-laptop-problem-30871/

See if this helps.

[staggers]

tx m8 tried that but had another go no joy

[staggers]

as far as dbox is concerned i'm a newbie but networking wise i'm not, so thought i'd but in with 1 or 2 things here hope u don't mind? (typical woman eh?!)

are u now trying through router or xover?

if using xover can u 'see' the dbox an your lan (i use a xover to server set up in work for demo's of software and protocol's the same)

if connecting through router there's quite a few things i'd try:
1. check the port on router's not dead (if more than 1 free use a different 1)
2.check you haven't locked down on no of connections allowed through router (i only allow 10 through mone for extra security layer)
3. have you checked ALL your ipconfig just in case anything wierd ging on? (start run cmd then type "ipconfig/all")
4. reset router and go from the top setting n/w back up that way it'll force u to check all settings

dunno if this helps? Claire

tx clair i am using crossover and no i cant see dreambox on lan when i click on status for lan i have

ipv4 connectivity limited
ipv6 connectivity limited

[Bulld0g]

Do you have a router ? I always find it easier to connect wirelessly rather than messing around with cables etc.

[staggers]

ye i have wireless router and have also tried connecting to the router with ethernet cable to dreambox

[psats]

tx psats ive been following steps by booth uk as detailed in post if i start all over again can you tell me all settings i need to change,with the above setting using crossover cable when i click on status of lan is says limited connectivity,am i close to connecting ? is there something i need to alter,feel like i have trioed everything cheers stags

post the settings you are useing on netcard and dream

[staggers]

have tried all settings on this thread plus some others last being the link metalkettle left ,look above