Fix: No CA Error

[vinc13e]

I can't fix my "waiting for acknowledge"

[deffc0n]

This problem is hardware no software .

[pomper]

I have a new problem, after i fixed the CA error. Thanks for this!!!
Now it doesn't find a tuner, it says "empty"
Strange.....
Perhaps I have to load another firmware? Through IP, it doesn't work. Get no reaction. Ok, i use the o-modem cable..., but which version I must juse?
I read in Display: #76D .... Thanks from Holland

[gwilson2210]

the link for the no CA fix is down - does anyone have this file available?

http://www.gsmsweden.com/forhike/sat...stage_pack.rar

[MrNoWayPablo]

You should check out page 3 of this thread if looking for zip file

[mrcoco]

thanks to you

[bling bling]

hi
have the same problem
no solutions

[pem1]

dry joints from the sim card to the motherboard m8

[briang97]

struggling to restore the d800

can get as far as getting the ip of the box back up but when i try to access through web page i get no connection it just times out, anyone any ideas?

[simmie]

I can't fix my "waiting for acknowledge"

You should try to unplug and plugin the power when having this error

[kebzor]

I fixed the issue in following way
1. switch off Dreambox
2. Connect serial cable and run Dream Up patched
3. Boot loader will be uploaded automatically
4. Flash new boot loader
5. Close Dream up and switch off Dreambox
6. Flash dreambox using web interface

Good luck

Used files can be downloaded below

DreamUP_patched_by_forhike_and_natas.exe

sim201_ssl82_20110423.rar

[galaxy1]

2ND STAGE BOOTLOADER AND FILES

[ATTACH]54806[/ATTACH]

thanx a million guys this 2nd stage bootloader worked for me and box is alive again.

[anabolxxx]

still not working..

[deffc0n]

Because your mb is foulty.

[Mr Red]

where can i find the file?