Fix: No CA Error

[DBTraitor]

u have nvr flash your box before?
Your sim version is at the front panel when you go to the flash mode for doing flashing

[dinkan]

This thread saved my box!

[pdo5775]

my box showed Err01 No CA Found after installing barry allen on a running peterpan image. Not sure what happend but I cannot get access with dreanup any more. Hope to get it fixed soon.

[goldway]

2ND STAGE BOOTLOADER AND FILES

[ATTACH]54806[/ATTACH]

it fixed my problem. second solution is working fine. thanks.

[WOODWARD395]

DreamUP Patched dm800 clone ( fix no ca error)

No ca found by 2nd stage loader
This can be done in 2 ways.
1) You have to have a working dreambox.
2) DM800_repair, you alter dreamup to be able to use greyed buttons.
Now for the first sollution.
1) Connect working dreambox DM600/DM800.
2) Open dreamup, press connect.
3) When dreambox is found by dreamup, insert Null-Modem cable in
the broken dreambox.
4) Press flash button, and chose a firmware.
5) The flash progress will probably hang, its OK.
6) Open dreamup again, connect the broken box, press connect.
7) If all went ok, you can now flash box again, (Use only serial
communication)
Now for the second sollution
1) Connect broken dreambox DM600/DM800
2) Open dreamup, press connect.
3) When you see second loader error popup, just press ok.
4) Open
5) Drag DM800_repair in front of dreamup, and press dream multimedia logo.
6) Now press the greyed Flash button, and chose firmware.
7) The flash progress will probably hang, its OK.
Cool Open dreamup again, connect the broken box, press connect.
9) If all went ok, you can now flash box again, (Use only serial
communication) dreamup_patched_dm800_clon.rar

[fooklee]

Try this.. read from some where

http://www.yassinov.com/forum/showthread.php?tid=162

Dreambox 800hd not responding to dreamup see below:

Requirements: Null modem cable
Procedure (With XP and hardware serial port)
1)Ensure dreambox is unplugged

2) Connect dbox to com port with NULL MODEM CABLE, do not try using a gender changer on a standard usb/serial cable. (Should be com1)

3) Fire up Hyperterminal create profile using profile

connection 115200 8 none 1 none
4 Click ok to activate should see a flashing cursor in hyperterminal

5 Power up Dreambox, wait few seconds and hit the 'f' key.

You should see the 'Err01 no Ca found' dissapear, a few lines of garbage appear in hyperterminal window and dreambox loading onto 'STOP' looking for DHCP assigned IP.

IP should be displayed shortly after where you can follow many other procs on here to access http://<displayed ip> and proceed with loading the correct SSL image.
I grabbed this one

Digital Kaos - Downloads - SSL84b for DM800 sim 2

Then flashed a new SSL84b image which was this

SIM2-SSL84b-TSimage-1.0.0-DM800HD-OE 1.6

All working fine now! Ive not seen a single method online using what i did above.

Note if you dont have XP and hyperminal. For Windows 7 you download putty under 'session - connection type - select serial and then you can select your com port there. I have not tested this with usb/serial lead. I read many things about driver issues with the maplin lead and was having so many issues with dreamup no responding i binned it using a direct com port.