NO CA FOUND/FILE TO BIG FIX

[alexxx304]

hello people
im geniuse;]
you must click extras and make recovery whem recovery endd, have you flash button and you can flas dm800
sory but i don'T speak english

[Kango]

hi, newbie here.

Recently just bought two sets of dm800hd-c. Set A comes with working image(Gemini version 5) and auto-keys. Set B only come with working image.
Can i use dreamup V1.3.3.4 to do a backup file for set A, and then flash the file to the set B so that Set B will also has working image (Gemini v5) and auto key?
Or can i use other alternate method to upgrade my set B?

[givaracom]

i have a problem wafter flashing a clone dm 800 error display, cant use rs 232 to flash with dramup

[BM300]

OPEN DreamUP
CHECK USE NETWORK
PRESS CONNECT
CONNECT ur dreamBox NUll Modem and LAN Cable must be mounted, u will get an IP Adress, after CA 2nd stage not found and nothing happen
Open Browser, be patient it will get a moment to OPEN and then u will have the Upgrade Firmware option available, then flash like before ur DM 800

Hello,
I get the IP address but cannot get the browser to logon to DM800 IP no matter how long I wait.
Tried both normal Lan and twisted cable.
Can log on to the web without any problems.

Thanks

[Bulld0g]

Is your firewall turned off ?

[BM300]

Thanks for your help,

Turned the firewall off , allowed the browser to pass the filter.

Still no luck.

Regards

[BM300]

Finally sorted it out

Thanks for all your help and great tips friends.

I used part of every method shown in this thread,
So credit goes to anyone who shared with us his/her experience.

The aim of the exersise is:
A- To get an IP address and load it into the Web Browser
B- To reflash the DM800 with a fresh nfi image or Bootloader.


This is how I got it to work with the clone unit that I have:

1- Connected Null modem Cable (9 pin RS232) to DM800.
2- Start DreamUp.
3- Connect power to DM800 while holding down silver button on DM800.
4- Wait for DreamUp to load.
5- If you get the Error message about no 2ndstage CA found, (repeat the steps 2-4 until you get an IP address on the DM800 screen).
6- I have an 8port switch connected to my router, so all my connection was to the switch instead on the Router.
7- Connect computer to switch using Cross LAN cable.
8- Connect DM800 to switch using normal LAN cable.
9- Power up DM800 while holding down the front silver button until Dream Multimedia or STOP is displayed.
10- Start up your Browser (I used Firefox).
11- Enter the IP address that you got from DM800 into the Browser ( e.g. http://192.168.0.125)
........Wait for the special loading screen to come up.
12- Select firmware upgrade.
13- Select location of the file location that you want load from your computer and click on Flash.
14- Wait for the blue scale to finish loading on your browser.
15- You can restart your DM800
or
16- flash it with a bootloader of your selection then restart DM800.

Good Luck

[hurry]

doesn't work for me

always have message ERR01: NO CA FOUND on my dreambox when i turn power on with RS232 cable plug and dreamup running.

i'd tried the 2nd_stage_pack and when i click on flash, choose my file, i have the File too big message.

Help me please.

[Arraysys]

doesn't work for me

always have message ERR01: NO CA FOUND on my dreambox when i turn power on with RS232 cable plug and dreamup running.

i'd tried the 2nd_stage_pack and when i click on flash, choose my file, i have the File too big message.

Help me please.

"ERR01: NO CA FOUND" tell you that your CLONE box cannot run the original image. You need a NULL Modem and Ethernet cable connected and the Dreamup application running in connecting mode before power on the box. Once the box turn and acknowledge a NULL Modem cable attached you will enter the flashing mode and shouldn't see "ERR01: NO CA FOUND". You will see the "found dm800hd box" at the Dreamup application windows.

CAUTION: Check your cable.
NOTE: You should use a RS232 NULL Modem cable not just RS232 cable. There are different type of RS232 cable.

[Ruszti]

Error1 Dm800 clon

Dm800 clone sim2.01 ss75 is down!
I used repair but can?t flash SSL only whit SS72
Begin to boat and not finish eni ever
Need Help to com up to SS75 or ?
Best regards
Ruszit

[Arraysys]

sim201-bl76c-gemini2-510-dm800

Dm800 clone sim2.01 ss75 is down!
I used repair but can?t flash SSL only whit SS72
Begin to boat and not finish eni ever
Need Help to com up to SS75 or ?
Best regards
Ruszit

You may try this image, come with SS76C
SGStarhub Digital-Kaos Image - Page 216

[aleqs]

Information Product Name ??? Booloader version Dreambox Second Stage Loader BUILD #59, built 20080509 Flash Size 64 MB Production Date (YYYY/MM/DD) N/A mID ? Serial Number ? MAC Address ? Printed Serial Number ? That whats shows in the web interface of my box , is it totally ruined ?

[kaka13]

Information Product Name ??? Booloader version Dreambox Second Stage Loader BUILD #59, built 20080509 Flash Size 64 MB Production Date (YYYY/MM/DD) N/A mID ? Serial Number ? MAC Address ? Printed Serial Number ? That whats shows in the web interface of my box , is it totally ruined ?

hi,

just old version flash (2008/2009)

rgd

[halim2731]

Having bad nightmare flashing the clone DM800, I managed to get it done. Using Dreamup version 1.3.3.4, firstly run dreamup, click connect button, connect Rss232 null cable modem to your box, anyway I did connect my network cable also to run together, and at this point connect you dreambox power supply without power on and press power button on your dreambox and on the power supply and wait until half of the green bar on dreamup show and only then you release the power button on the dreambox, and here you can see after finishing the button flash will show, and here you just click flash and locate the nfi file to flash on..here you go, with happy ending.

Note:- At the early stage My dreambox 800hd display error message. and with the above mentioned text I managed to get it done. Please note that do not release the power chrome button on the dreambox until a least half of the green progress bar on the dreamup being done.

[Xelmep]

Dear All,
Please everyone who solve the problem "file to big!" , Please help us how to solve it too, what to do, what to install with dreamup, bootloader or ex. any gemini firmware, or something else ???

Thank you.