just a few mins 10 tops
Eurovox PVR 2008 EX5000 Advice Please
Collapse
X
-
if you get some premium channels ie sky sports unscrambled then your box sounds like it has flashed fine it just sounds more of a signal issue
it may be your connection to the box(a frayed wire) or you may need a signal booster are you using a splitter to feed multiple boxes?
you shoud have a number of itvs to choose from if you look in the a-z listings find a working one and swap with the other oneComment
-
Thanks... I did a scan again and found loads of ITV1's and picked one that worked but I still get problems with the Disney Channels, Sky Premier, Sky Sports X & Hallmark Channels being jumpy and unwatchable - all others seem OK
....when I go on these channels and look at the info for the signal strength I'm getting 83% on these and about 85% on all others... surely that should be OK or do they all need to be 85%?
I don't have splitter in place, this is straight through from the V*rg*n box on the wall and into the back of my ex5000 with the original cable supplied by V*rg*n..... any further thoughts very much appreciated
Cheers Guys n Gals
Comment
-
hi guys, euro vox virgin here. I just bought a eurovox vmax 2008 but when scanned channels does not give me sky sports etc only the free ones. sky sports etc just say updating codes...........foreverComment
-
rtetyredfgsdfgfdgdfgdfg
fgdgdfgfdgd
dsgdfggd dfgQUOTE=cunstunt;52818]Hi thered,
Hope you don't mind me asking you a couple of questions but your reply seemed to help me with problems I'm having with my dad's pvr 5000.
I'm a complete novicefdgd to all this, btw.
The pvr came with firmware version 1.1 and I did a powerscan and got all the channels but they're all scrambled. I never read before about setting the box to sky sports 1 until it updates the codes.
If I repeat the powerscan (with 1.1 firmware) and then leave it on ss1, will it work for me?
Many thanks and sorry if I've hijacked the thread,
slan for now,
sw[/QUOTE]Comment
-
-
Thanks for this info
Thanks for this info gents. I've got the eurovox ex5000 and have run the UFL software (v1.1)(got it from the decrypt forum). But when I reboot the box and go into the menu its says I still have S/W v 1.0 from july 2008.
I'll try the link above and let you know what happens.
CheersComment
Comment