The Box Super USB V1.12

[bigfella]

[QUOTE=jdandc69;264735]After succesfully installing the new firmware V1.12 on my TheBoxSuperUSB, I then installed the logo file. After it automatically rebooted, the screen turns green and I am asked to choose a language.
If I try to re-install the v1.12 firmware( also tried V1.07 ) I receive an error "it is not a file of the IRD"

I copied the firmware file to the root of USB stick, powered off the Box, inserted the USB stick and then switched on.
Again I am asked to choose language, and then when usb is selected and I try to install the firmware, the same error appears.

Any ideas or suggestions ?

Boot sequence is as follows -
Power on
88 88
88 82
b-01
Green screen
Language select
(logo does not display at any point)


I managed to do a automatic scan and it populated, but when I change channels etc, I can hear the channel but the picture is not displayed.
If I change channel the screen displays a scrambled image.[/QUOdont kno about the logo but the channels not displayin pic or sound tands to be scart leads.....check leads....do a factory reset

[tomearly]

starview 1.12

hi
I have used v1.12 and i have the majority of the channels back - however i dont have the movies or sports channels - should i have them or is this as much as we can get now?
thanks
tom

[EAMO 2]

(logo does not display at any point)


I managed to do a automatic scan and it populated, but when I change channels etc, I can hear the channel but the picture is not displayed.
If I change channel the screen displays a scrambled image.[/QUOTE]

Try flashing LOGO BIN file & then flash v1.12

[EAMO 2]

hi
I have used v1.12 and i have the majority of the channels back - however i dont have the movies or sports channels - should i have them or is this as much as we can get now?
thanks
tom

Those missing chls. are gone Nagra 3

[bigbadb]

hello

Getting a starview soon. Will give this a go then

[windigo]

Hi. New to starview box but used to eurovox. I have just read through this thread and found it very informative. Thanks to all the posters.

[nikrizal]

Just bought starview superusb with v1.10
Not sure to upload v1.12 after some reported issues.

[dermot6983]

fta channels gone

i downloaded v1.12 and did the whole reboot thing now i have lost most of the fta channels. strangely i still have sky sports, setanta and the other sports channels. does anybody know what i did wrong or has this happened to anyone else. im on cho*rs in cork,ireland. any help would be great. thanks.

[cactikid]

i downloaded v1.12 and did the whole reboot thing now i have lost most of the fta channels. strangely i still have sky sports, setanta and the other sports channels. does anybody know what i did wrong or has this happened to anyone else. im on cho*rs in cork,ireland. any help would be great. thanks.

anytime you flash boxes you need to factory reset 0000 to delete and autoscan your provider and keycode to on,menu1570 keycode to on,and exit out.

[dermot6983]

still something wrong

anytime you flash boxes you need to factory reset 0000 to delete and autoscan your provider and keycode to on,menu1570 keycode to on,and exit out.

thanks but ive tried all that multipal times . the tv crashed last week and i rebooted it and upgraded to v1.12 since then ive lost most of the fta channels. ive rebooted and installed it 4 times already and again since your thread. i have the box nearly a year and ive upgraded several times sucessfully before. im just missing something this time. is there a problem with v1.12 or has anybody had similar problems.

[romster]

great work! only 1 problem though seems as if the time display has gone when i press the info button? anyone else have this problem?

I've had this problem too.

[Dreamer]

I've had this problem too.

So are you gonna tell us if you fixed it romster or are you gonna leave us all in suspense?

[andyproc]

What is the provider ID for the Starview 4 because when i put in the the new codes my box still does not work.please help

[andyproc]

Why does the dollar sign keep coming up after i have put in all the codes after automatic scan

[andyproc]

When I go into nagravision it has 3 options 1. provider id 2. key number 3. key data.

In the provider id the first bit is 54 01 and then i have keyed in the latest codes in 00 and 01 key number.

Then i did the same for provider id 5c 01 and it carries on untill a load of f's come up which i just left.

After going to scan it still has the dollar sign on the channels and i can't view them.

any help would be appreciated.