Starview 5 - firmware

[philipw]

New to this

I am also new to this, it would be good to know were I can pick a good cheap box up from.?

And ideas?

[irishbull100]

sv5

hi, totally new to this, just bought an sv5 box as a present for xmas - need to know what to install to get all the relevant cable channels.. cheers!

[mak521]

hi guys new to this forum, been usin starview since the 1st box came out many moons ago, just got myself a box usb 2(sv5) when i try to access menu via 1570 it does nothing, cant access the cas system screen to ste my default key, any got any ideas

[maca]

have you updated your box m8

[mak521]

it appears the box has come with pre-installed firmware as when i scan channels it finds all the relevant channels

[maca]

it appears the box has come with pre-installed firmware as when i scan channels it finds all the relevant channels

try updating it again with latest firmware http://www.digital-kaos.co.uk/forums...90923-bin-902/

[mak521]

but surley the version wouldnt stop the 1570 form lettin u access the cas system menu

[smirnoff_rules]

u need 1.07 at least m8 or link above

[satsmo]

The pre installed firmware is probably FTA only. It will scan all TPs but you cannot access the CAS menu, do as Maca has said and you will be able to do so then.

[maca]

it could be the first version think that had some problems..

[DESSERTDOG]

it could be the first version think that had some problems..

Yes it did on some boxes m8 works ok on mine but the second release is what you need its in downloads m8 its not the version smirnof said i think its v2.03 there are only two versions that i know of for the Sv5 Its here:

http://www.digital-kaos.co.uk/forums/downloads/starview/23/theboxsuperusb2_v2-03-20090923-bin-902/

check out the tut while your there it may help

[maca]

Yes it did on some boxes m8 works ok on mine but the second release is what you need its in downloads m8 its not the version smirnof said i think its v1.03 there are only two versions that i know of for the Sv5
check out the tut while your there it may help

by the way that tut is spot on well done dd..maca..

[mak521]

many thanks lads got it workin with version 2.03

[clf-gas]

Many many thanks guys, esp Satsmo and DD.
Got my box up and running no problem.

[daleski]

Hi, i've bought my starview 5 box today. I've downloaded and put onto usb the

TheboxSuperUSB2_v2.03.20090923.BIN

firmware.

But when i click on usb on the menu, it goes to the data transfer page and then

"not a file of this IRD"

Is there a certain way the file needs to go on the usb stick? I just dragged it on there. The stick says that it's formatted to fat32 when i checked.

If anyone could help that'd be great.