Dell Mini Inspiron 1012 - Please help recover Bios and Hdd Pass
Collapse
X
-
Dell Mini 1012
Dell Mini Inspiron 1012 - Please help recover Bios and Hdd Pass i would greatly appreciate you
Hdd password error code [15415]
System Service Tag code [FRNT4Q1]
ThanksComment
-
-
for BIOS enter wrong password 3 times and post system disabled number
I don't think it is possible to do HDD password by error codeComment
-
Those numbers I posted were the only ones that came up when I entered the password wrong 3 timesComment
-
-
Yea sorry none working and it says the same thing HDD password error code: 15415 and system service tag code FRNT4Q1Comment
-
as I said earlier I have never seen a successful code generated from HDD error code (only from BIOS system disabled code)
so from info given our calculators cannot generate a code for youComment
-
Dell Boot ISO
Here's the Dell Bootable ISO to clear BIOS to default erasing all admin and protection passwords. This works well for most Dells.
Dell_Boot_ISO.rar (778,46 KB) - uploaded.net
Info and manual inside. Just burn ISO to disk and boot with it. Read the PDF.Comment
-
Hello all, im new here... I Just got a dell mini inspiron 10 im having issue getting to boot, I am assuming it is thru the cmos,
boots past the Dell symbol and the f2 for set up exctra... Then it goes to black screen with a blue box "SAYS ENTER PASSWORD"
The guy i got it from dont remember it, and i have searched all over the internet for ways out of it. I was told to remove the cmos battery?
i did that, put it back together... SAME THING... I called dell they said they will get back to me. with a back door code?
Anyway i seen some ppl here get success to get by this, i want to remove the need for the password and believe it is CMOS...
I dont see anything about a hhd ERROR,
The code im getting after i enter a wrong password is:
system disabled [ 07019 ][
service tag [ 9hk7mk1 ]
If anyone can help faster than DELL WILL i would app it... I know it out of warranty and doubt they will help
Thanks againComment
-
Hello all, im new here... I Just got a dell mini inspiron 10 im having issue getting to boot, I am assuming it is thru the cmos,
boots past the Dell symbol and the f2 for set up exctra... Then it goes to black screen with a blue box "SAYS ENTER PASSWORD"
The guy i got it from dont remember it, and i have searched all over the internet for ways out of it. I was told to remove the cmos battery?
i did that, put it back together... SAME THING... I called dell they said they will get back to me. with a back door code?
Anyway i seen some ppl here get success to get by this, i want to remove the need for the password and believe it is CMOS...
I dont see anything about a hhd ERROR,
The code im getting after i enter a wrong password is:
system disabled [ 07019 ][
service tag [ 9hk7mk1 ]
If anyone can help faster than DELL WILL i would app it... I know it out of warranty and doubt they will help
Thanks again
Hi
first post should be here http://www.digital-kaos.co.uk/forums/f2/
say hello and join the community
in the meantime in order try one of these
xmb
sqqbw
687989Last edited by smoggy; 28 March, 2013, 12:59.Comment
-
I tryed in that order....
xmb
sqqbw
687989
The xmb got me thru the bios i guess,
now its asking for a Hdd Password
gives me error code [14876]
syst serv tag [9hk7mk1]
Again thanks for all the help, i done took out the cmos battery over night,
put it back together this am.. BUT... it showed me other stuff like the bios AO6, the prcessor speed ect,
said 0271 check date and time AND 0251 system cmos checksum bad? default settings set?
then it gave me choice to enter set up? or proceed, I entered the setup to adjust clock and remove old password,
But it went to the password thing again so i entered in the XMB it passed thru but then came up with the Hdd password?
Also I downloaded the Dell_Boot_ISO.rar file and was going to try that, but there is no cdrom just a card reader slot...
It wont boot to the card, so i think it is set to boot to hard drive and skip card..
Again i would like to say thanks ahead of time and for taking your time to help me....
Last edited by hsdavisjr; 28 March, 2013, 23:12.Comment
Comment