Epson SX125 waste ink counter reset

[Professor X]

Hello Jonnhybeast and thanks for sharing the file. This is my first post, I hope it is in the right place!
I have an Epson Stylus SX125 printer and even though I purchased a brand new official Epson black ink cartrigde last week and only printed a half page, today when I changed the other 3 color cartridges the printer manager screen showed me that the black ink needed to be changed too The bloody orange ink light is permanently lighted and I cannot print until I replace the 90% filled cartridge with a brand new one!

So I downloaded the program, followed the instructions but it did not work. When I clicked on "Check" I got the message: "The counter value has been read properly"... so I thought that we're all set.
Then after I ticked the 2 boxes and clicked on "initialize", and was asked to turn the printer off, I got the message "The waste ink pad coutner has been initialized properly. Turn on the printer and click on the [check] button to check the waste ink pad counter value"... I turned the printer back on, and when I clicked on "check" I got the message "the counter value has been read properly"... Back to square 1, the orange light of the ink is still on unfortunately
The first time I tried this, I briefly saw the Epson windows showing the level of ink in the background. Then nothing.

Can you help me please, what am I doing wrong? I have Windows 7 64 bits, perhaps this is the problem? I am an old fart and could use some step-by-step help, I am so sorry for the disturbance.
Any help will be most appreciated. Thank you.

[techekrederem]

Hi, i have the Epson Stylus Photo P50, will this software solve my problem? hope so.

Thanks for the post.

[berserk5]

Don't work with my sx130

[elliotd4850]

will epson be able to see this if it goes in for a service?

[crocitizen]

Still working? Thanks in advance.

[FlexM3]

Hello Jonnhybeast and thanks for sharing the file. This is my first post, I hope it is in the right place!
I have an Epson Stylus SX125 printer and even though I purchased a brand new official Epson black ink cartrigde last week and only printed a half page, today when I changed the other 3 color cartridges the printer manager screen showed me that the black ink needed to be changed too The bloody orange ink light is permanently lighted and I cannot print until I replace the 90% filled cartridge with a brand new one!

So I downloaded the program, followed the instructions but it did not work. When I clicked on "Check" I got the message: "The counter value has been read properly"... so I thought that we're all set.
Then after I ticked the 2 boxes and clicked on "initialize", and was asked to turn the printer off, I got the message "The waste ink pad coutner has been initialized properly. Turn on the printer and click on the [check] button to check the waste ink pad counter value"... I turned the printer back on, and when I clicked on "check" I got the message "the counter value has been read properly"... Back to square 1, the orange light of the ink is still on unfortunately
The first time I tried this, I briefly saw the Epson windows showing the level of ink in the background. Then nothing.

Can you help me please, what am I doing wrong? I have Windows 7 64 bits, perhaps this is the problem? I am an old fart and could use some step-by-step help, I am so sorry for the disturbance.
Any help will be most appreciated. Thank you.

I think you have to try it with Windows XP. I read a lot, that's only working in XP.

[FlexM3]

I have problems with downloading the software. Can some on help me? I get the message, that I have no permission.
Thank you.

>> solved. DL in the First Post didn't work, but in the download section it works.

[FlexM3]

Ok, thank you very much. It works for me. OS: Windows XP, Printer: SX125. Printer driver installed, and then using the program as descripted in post #1

[Jimmy2215]

Life Saved

You are a life saver. I don't know you but I love you.

[James786]

I can't download the link?