latest blade 7000 patched firmware(13/9/2011)

[needy]

HI GUYS I CANT DOWNLOAD THE LATEST PATCHED FIRMWARE IT JUST SAYS THE FILE IS CORRUPT WHEN I TRY TO UNZIP IT, ANY THOUGHTS THAMKS

[ulrich100]

Hi Thanks, I tried that previously and got the exact same result.... also I tried putting in an ip address instead of the server name made no difference.. I may have to try an older router I have. I have servers running through this Dlink router and have never had a problem.... very strange....

I have had a similar problem, tired for days to get a stable conncetion to my router. turned out that it was a hardware fault at the NIC.

Seems there is a batch doing the rounds with the same problem.

If the ethernet cable is only partial inserted I get a connection (orange light on, visable IP) if it is propery enbedded (clipped into place) there is no cennection to the router (thus no IP)

I guess its to do with the soldering of the connections points. Or the NIC itself is 'defuncked'

Anyhow, I need to get on to my supplier for a new box.

[idxinfosys]

HI GUYS I CANT DOWNLOAD THE LATEST PATCHED FIRMWARE IT JUST SAYS THE FILE IS CORRUPT WHEN I TRY TO UNZIP IT, ANY THOUGHTS THAMKS

Use my link a few posts earlier, i had the same problem.... found a working version on another site and posted.

[edwardihno]

hi all was thinking about getting one of these, i used to be into cable until all that dried up, not got a cline but can this box be used to open any euro sats with patched firmware alone. don't expect full explanation but a nudge in the right direction would be much appreciated. many thanks in advance

[singhisking]

HI GUYS I CANT DOWNLOAD THE LATEST PATCHED FIRMWARE IT JUST SAYS THE FILE IS CORRUPT WHEN I TRY TO UNZIP IT, ANY THOUGHTS THAMKS

try using Winrar to unzip it rather than winzip.

[zee24]

this 1 aint the latest firmware anyway the october 1 is the latest

[thisisanswwer]

Use the very latest patched firmware attached, using it currently and is great.... no problems so far.

many thanks

[kapadia]

i have problem with bm7000s all hd channel keep freezing i got vm super hub with 100mb some hd channel work fine and some keep freezing i dont know wats wrong ??/

[kapadia]

bm7000s some hd channel freezing

i have problem with bm7000s some hd channel keep freezing s sport hd 1 keep freezing but ssport 2,3 and 4 hd working fine same way in movie as well i have vm super hub(netgear) with 100mb and box firmware 122p 25-4-11 pls help . . . on this

[zee24]

i have problem with bm7000s some hd channel keep freezing s sport hd 1 keep freezing but ssport 2,3 and 4 hd working fine same way in movie as well i have vm super hub(netgear) with 100mb and box firmware 122p 25-4-11 pls help . . . on this

you have the old firmware for starters, but i dnt think that would effect the freezing

[irishbluestaffy]

must b yr server m8

[ramjet]

hi all was thinking about getting one of these, i used to be into cable until all that dried up, not got a cline but can this box be used to open any euro sats with patched firmware alone. don't expect full explanation but a nudge in the right direction would be much appreciated. many thanks in advance

just the remaining ucas channels that are opened using a softcam , so not a lot to be honest , you would really need that C jobby

[ramjet]

i have problem with bm7000s some hd channel keep freezing s sport hd 1 keep freezing but ssport 2,3 and 4 hd working fine same way in movie as well i have vm super hub(netgear) with 100mb and box firmware 122p 25-4-11 pls help . . . on this

update your firmware to october , and check your signal and quality levels are ok , if they are then its your server at fault

[mrjai66]

hi guys wondering if anyone has up todate channel list for blade including all asain channels as some of mine are blank.
many thanks

[usman786]

I just installed BM7000s-05-10-11-7ex.zip, without any factory reset, it kept all settings and channels. Youtube is very clear at highest quality when the clips plays otherwise you have to reboot box.