Oscam + CCcam 2.1.3

[Rodbouy]

Can you still not get in to the webif?


How are you installing OScam?

State steps your doing to give us a better understanding?

Try switching to PLi Jade and manually adding OScam?

[faridbou]

Hej Roudbouy:
Iam using gemini E1 now i have give up wil use pli image and I wil let you now juste give me 15minute thaksn

[davvo]

try with all 3 aeskeys

[faridbou]

Davvo
Nothing stil not working even i am juste using oscam1.00 it should be easy to work with tnt card
best regard

[garry1312]

Update for use on my side guys.

within my router there is settings for Dynamic Dyns so I put all my details in there username password, address and since then I have had no cut offs and running very well.

So dont know if for some reason it was not always connecting to dyndns and if this has resolved that issue.

Dont want to get my hopes up just yet but looking good the now.

Satsmo did you see my other reply to you regarding the files? As the script would still be of interest to me.

[davvo]

gary try this

next time it happens
google whats my ip (note the ip)
then log into your dyndns account at dyndns dot com
go to my host and check the ip they should both match

[garry1312]

Thanks Davvo will give that a try if it occurs again.

Fingers crossed it doesnt

[Rodbouy]

Davvo
Nothing stil not working even i am juste using oscam1.00 it should be easy to work with tnt card
best regard

Is the WebIF opening up?

So we know if OScam is working or its just the configs?

[satsmo]

Satsmo did you see my other reply to you regarding the files? As the script would still be of interest to me.

I did just now Garry. I would leave the script for now as it looks like a straight forward IP routing issue, to which you may have resolved now.

I compiled Oscam to my specific set up and it is on a standalone server and an external reader, so will not be exactly the same as your set up or Oscam binary. But you could easily configure it to match with a few edited commands.

[faridbou]

Davvo:
No it thas not open webinf oscam .
but with cccam2.21 using peter pan it open with ip 10.0.0.*:16001does open

[garry1312]

I did just now Garry. I would leave the script for now as it looks like a straight forward IP routing issue, to which you may have resolved now.

I compiled Oscam to my specific set up and it is on a standalone server and an external reader, so will not be exactly the same as your set up or Oscam binary. But you could easily configure it to match with a few edited commands.

Thanks sats much appreciated will see how it goes as all is looking well at the moment but still early days but it has been on longer this time without any issues than it has before

[faridbou]

Cccam2.1.3/Oscam1.00 or oscam1.00/Cccam2.1.3 is it to same? in dm
2: image pli dm7000 is it to same procedure as gemini var/bin/tuxbox ?
thaks

[faridbou]

Hej this is all what i did :
downl Cccam2.1.3/Oscam 1.00 and i have put it in:
var/tixbox/conf
oscam conf:
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
saveinithistory = 1
PreferLocalCards = 1

[newcamd]
Key = 0102030405060708091011121314
Port = 34001@0500@030B00

[webif]
httpport = 16002
httpuser =
httppwd =
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.100-192.168.0.200 her I realy don?t now where to put my dm ip 10.0.0.2
Cccam conf;

N: 127.0.0.1 34001 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14

oscam server;
[reader]
Label = tntsat
Protocol = internal
Device = /dev/sci0
detect = CD
Group = 1
caid = 0500
AESKeys = [EMAIL=*****************************/EMAIL]
oscam user
[account]
user = test1
pwd = test2
group = 1
au = tntsat
guys your are my last hope to get TNT carde working

[Rodbouy]

Mate start from scratch.

Load Pli jade 3

then MANUALLY install OScam. Get the latest stable build from their site

oscam-stable-1.10-powerpc-tuxbox-old-webif-Distribution.tar.gz


Thats the file you want. Google the oscam forum

Then follow my steps a few post back.

[satsmo]

Use Oscam and dvapi do not use CCcam for TNTsat.

We can do Oscam here Rod