VAG-COM/VCDS EVERYTHING

[1 6 D]

There is a new version of VCDS, Beta 12.10.0, I haven't installed it yet.

[mattydr67]

There is a new version of VCDS, Beta 12.10.0, I haven't installed it yet.

Yes it is Beta version.
Do you have a genuine tool to use it?
No...so don't use it becasue will erase your Atmega
Good luck

[noogi]

I know its wrong I've not changed anything but looking at some screenshots from ponyprog but the layout is different

Low fuse: CD
High fuse: DC
Extended fuse: F9
Lock fuse: FF

[teerak2uk]

Low fuse: CD
High fuse: DC
Extended fuse: F9
Lock fuse: FF

yes tried that with v11.11 but didnt work

[liviudiaconu]

Print screen with "Test" please and with "About"...
If test not OK, K1=OK, K2=OK and nothing about CAN, eeprom is wrong.

[teerak2uk]

Print screen with "Test" please and with "About"...
If test not OK, K1=OK, K2=OK and nothing about CAN, eeprom is wrong.

all up and running now thanks to all that helped here are screens of soft h/w etc and files i used to do it with.

***Note: the 3 wires going to the under side of the board are ground wires for the avr interface***

[teerak2uk]

all up and running now thanks to all that helped here are screens of soft h/w etc and files i used to do it with.

These are the other files with pics that i used

[ironderek]

Couple days ago I've got VCDS Adako 10.6.5 Polish language version dump. I flashed my BL cable and tried to test it, but after 2 full scans cable becomes unregistered during third auto scan. Any idea why? Is it bad dump?

[mattydr67]

Couple days ago I've got VCDS Adako 10.6.5 Polish language version dump. I flashed my BL cable and tried to test it, but after 2 full scans cable becomes unregistered during third auto scan. Any idea why? Is it bad dump?

Flash it back and install the softwear in a computer that you'll cannot conect to internet ever first
The if the interface will be erased again this menas that you have a bad dump
Good luck

[KenshinPT]

Couple days ago I've got VCDS Adako 10.6.5 Polish language version dump. I flashed my BL cable and tried to test it, but after 2 full scans cable becomes unregistered during third auto scan. Any idea why? Is it bad dump?

Matty is right. If you own the good 10.6.5 Polish dump you need to be careful with the internet.

[andrius]

can the license be extracked from D1 D2 D3 files? many thanks

[mattydr67]

can the license be extracked from D1 D2 D3 files? many thanks

NO
Guys if it was such simple way now the Ross-tech it was broken
Adn the guys who can do this as well
So please stop dreaming
Good luck

[BrendanT]

i see the new software of VCDS lite v1.2 is out by Ross-Tech can anybody please help me with a keygen or a loader for this

Thanks

[mattydr67]

i see the new software of VCDS lite v1.2 is out by Ross-Tech can anybody please help me with a keygen or a loader for this

Thanks

The last loader was for VCDS Lite v 1.0
This one was made my old and very good friend Aminebot
No KeyGen and no Loader after this last good one
Try a new HEX-CAN interface if you like to have more function for the VCDS
Good luck

[xoom]

can the license be extracked from D1 D2 D3 files? many thanks

FW is in: HCC184.bin, HP184.bin files.. Its encrypted and it not contains eeprom part imho

Those files can be decrypted via VCDS cable.. like that you can have newest FW but not eeprom part..