FY800HD

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stunner
    Newbie
    • Feb 2011
    • 6

    #61
    U got the white box or black one?heard the white one got no tuner at all.

    Sent from my GT-N7102 using Tapatalk 2

    Comment

    • jatrophaseed
      DK Veteran
      • May 2010
      • 589

      #62
      The Vii outside is a poor indication of the mobo version. If your 'Chn search' is 3 digits, chances r no, you cannot get 156.5Mhz but TV4$ME is ok, search for the freq.
      If your 'Chn search' is 6digit, ( new small digi-tuner) this type box can rcvd 156.5Mhz. h2,h2 hd. lifetime and lifetime hd. I heard a new fw is coming out soon, perhaps you contact your supplier for new fw upgrade??
      Dont PM me, I am not related with them.

      Pls also note these boxes' RJ45 are not connected, so it is a doorstop when N3 comes. Info i suggested are for your own reveal, many tawkays noobies dont care about changing boxes every few months, i was told straight in the face. Decision at your discretion.
      I always pre-empt any new changes.

      Originally posted by chrome08
      hi all, just would like to know, cos i purchased the latest FY800HD-VII set top box.
      Unable to add in the new channels like Lifetime, Lifetime HD, H2, H2 HD and also TV4Me.
      This channels are all in 156.00Mhz frequency with the symbolrate of 6090 (as given by astrobox).
      Anyone able to add these channels in the set top box or have any idea how to resolve this?
      Last edited by jatrophaseed; 22 June, 2013, 12:33.

      Comment

      • jatrophaseed
        DK Veteran
        • May 2010
        • 589

        #63
        Can you pls elaborate? some jpg to support your hear-say?

        Originally posted by stunner
        U got the white box or black one?heard the white one got no tuner at all.

        Sent from my GT-N7102 using Tapatalk 2

        Comment

        • stunner
          Newbie
          • Feb 2011
          • 6

          #64
          I'm on black fy800HD unless I could open up my friend's white box if not I couldn't post the jpg here.maybe some senior here will know about this more.

          Sent from my GT-N7102 using Tapatalk 2

          Comment

          • chrome08
            Newbie
            • Jan 2013
            • 13

            #65
            Originally posted by pekakbadak15
            Have u try manual scan frequency 157mhz.
            yup tried 156 and also 157, still cannot.

            Comment

            • chrome08
              Newbie
              • Jan 2013
              • 13

              #66
              Originally posted by stunner
              U got the white box or black one?heard the white one got no tuner at all.

              Sent from my GT-N7102 using Tapatalk 2
              I go the latest small black colour one, which is about the size of the palm....
              something like this
              fy800hd-vii.JPG

              Comment

              • chrome08
                Newbie
                • Jan 2013
                • 13

                #67
                Originally posted by jatrophaseed
                The Vii outside is a poor indication of the mobo version. If your 'Chn search' is 3 digits, chances r no, you cannot get 156.5Mhz but TV4$ME is ok, search for the freq.
                If your 'Chn search' is 6digit, ( new small digi-tuner) this type box can rcvd 156.5Mhz. h2,h2 hd. lifetime and lifetime hd. I heard a new fw is coming out soon, perhaps you contact your supplier for new fw upgrade??
                Dont PM me, I am not related with them.

                Pls also note these boxes' RJ45 are not connected, so it is a doorstop when N3 comes. Info i suggested are for your own reveal, many tawkays noobies dont care about changing boxes every few months, i was told straight in the face. Decision at your discretion.
                I always pre-empt any new changes.

                you are right, the channel search is 3 digit only, no chance of putting in the .5 mhz, maybe thats why can't search for the channel, also, can i just ask, what do you mean by "doorstop when N3 comes"?
                I have been trying to contact my supplier for FW upgrade for days, still awaiting response

                Comment

                • pekakbadak15
                  Top Poster
                  • Mar 2012
                  • 103

                  #68
                  Originally posted by chrome08
                  you are right, the channel search is 3 digit only, no chance of putting in the .5 mhz, maybe thats why can't search for the channel, also, can i just ask, what do you mean by "doorstop when N3 comes"?
                  I have been trying to contact my supplier for FW upgrade for days, still awaiting response
                  Simple term is the box will become useless. The supplier can claim that their fy box will work on n3 but has it been tested? Even their autoroll function was not put to the test yet.

                  Comment

                  • jatrophaseed
                    DK Veteran
                    • May 2010
                    • 589

                    #69
                    @ P15, yes, u r right, their AU roll is not tested. N3 some models had bn tested but 95% of their boxes are NOT usable in N3 new system share. The box will not work independently. Pls read up on Nagra3 system sharing and get a 1st hand knowledge of what is to come. My personal suggestion is a small group ~~~~. Dont depend on market uploader.

                    Comment

                    • Polluxti
                      Newbie
                      • Jan 2013
                      • 12

                      #70
                      Seems this FYHD thread is the most subscribe.. anyway, I was pondering over which dreambox to get and came to a decision to get the DM800HD-SE but with N3 in the works, I went for the FYHD800 VII because it is too bloody cheap for the price on a HD set compared to the 800se.. and asking the old birds here for directions where to buy the box seem to go nowhere as it's probably sensitive..

                      My opinions on the box? The FYHD is really a good budget box. It appears to be a touch slower compared to a friend's DM500C box and the SH default stb. The interface still loses out to those by Dreambox, but it's HD resolution is great and the tuner seems to acquire the signal better than dreambox, although this is just an impression as I haven't and don't intend to test the 2 units side by side as the boxes are at different places (mine and a friends).

                      Unfortunately, the tuner doesn't have the .5hz searching function so h2 and the other newer channels are no go but it's not a deal breaker for me as I have a SH set top box in the main living room. (using it as a spare for bedroom viewing before sleeping).
                      (UPDATE 22Aug2013: the new firmware is out and I can now receive these new channels no problem, link is in post #273)

                      I have read thru the cons of the FYHD boxes, and these version may have addressed them. The previous box suffered from a poor PSU design within the box and they have mitigated this by using a external power adapter instead. I haven't tested if the ethernet is connected anot but looking at the interface of the box, it doesn't appear to have any network function but I'm not aware how it usually works as it's my first time using such a stb.. there are USB ports and there is an option to use a USB wireless adapter so MAYBE it can have a wifi function but I haven't looked into it either..

                      Firmware update appears to be done only via USB so it appears there's no way for user updating so be aware where you buy the set from as the firmware upgrade needs to be compiled by the factory so YMMV with any of the supplier..
                      All in, I can't complain for the price since I can watch alot of channels already for a auxiliary room box..
                      Last edited by Polluxti; 22 August, 2013, 06:22.

                      Comment

                      • Polluxti
                        Newbie
                        • Jan 2013
                        • 12

                        #71
                        Got a reply from the source I enquired about the newer h2 frequencies

                        If manual search no help, have to wait for next upgrade software. If you need to get more channels,i suggest you buy DM800HD or DM800SE.
                        (UPDATE 22Aug2013: the new firmware is out and I can now receive these new channels no problem, link is in post #273)
                        Last edited by Polluxti; 22 August, 2013, 06:23.

                        Comment

                        • 8allan5
                          Newbie
                          • May 2013
                          • 3

                          #72
                          Hi bros... I have a white hd800-e... it keep auto reboot after some time... any1 know how to resolve? Thanks!

                          Comment

                          • chrome08
                            Newbie
                            • Jan 2013
                            • 13

                            #73
                            Originally posted by 8allan5
                            Hi bros... I have a white hd800-e... it keep auto reboot after some time... any1 know how to resolve? Thanks!
                            i think its the firmware issue. Might wanna get the firmware from the supplier and reflash it.

                            Comment

                            • denverp
                              Newbie
                              • Jul 2013
                              • 3

                              #74
                              Can one download the FYHD800C VII firmware from somewhere? Iin case of need to reload the firmware.

                              Comment

                              • jatrophaseed
                                DK Veteran
                                • May 2010
                                • 589

                                #75
                                Refer to link with update:

                                Comment

                                Working...