Lastest SG Updated Channels for the upcoming B****P****L?

[mq2012]

highlight right click edit transponder data

[jnashville]

highlight right click edit transponder data

okay i will edit it and try it out at night, thanks thanks!

[mickyyeow]

Hi brother, to tune for the *** new channel , please follow here ( only apply to DM800 HD)
1. press Menu
2. Setup
3. Service Searching
4.Tuner configuration
5. It appear Tunner A ........., Enable. Just press enter n go in
6.For all scan band US ... change them to yes. ( right arrow will do )
7.Only select QAM256 to be Yes
8.Change Scan additional SR from 0000 to 6090 ( one will do )
9. press ok to save changes
10. Exit out to auto scan
11.put clear before scan to NO first. before u press OK. If not all your old channel will be lost

That all , around 20 -30 new channel can be found

Enjoy brother

[jack_diniro]

Hi brother, to tune for the *** new channel , please follow here ( only apply to DM800 HD)
1. press Menu
2. Setup
3. Service Searching
4.Tuner configuration
5. It appear Tunner A ........., Enable. Just press enter n go in
6.For all scan band US ... change them to yes. ( right arrow will do )
7.Only select QAM256 to be Yes
8.Change Scan additional SR from 0000 to 6090 ( one will do )
9. press ok to save changes
10. Exit out to auto scan
11.put clear before scan to NO first. before u press OK. If not all your old channel will be lost

That all , around 20 -30 new channel can be found

Enjoy brother

Hey man thanks!

I\m also trying to find out how to do it for the FY800HD VI and FY800HD VII.

But it's a great help! =-D

[gnnbccb]

Yo boss, i've tried your method leh..
But after scanning, i din see any new channels.
WHere is it supposed to be?


Pai sae... stupid question.. :P

Hi brother, to tune for the *** new channel , please follow here ( only apply to DM800 HD)
1. press Menu
2. Setup
3. Service Searching
4.Tuner configuration
5. It appear Tunner A ........., Enable. Just press enter n go in
6.For all scan band US ... change them to yes. ( right arrow will do )
7.Only select QAM256 to be Yes
8.Change Scan additional SR from 0000 to 6090 ( one will do )
9. press ok to save changes
10. Exit out to auto scan
11.put clear before scan to NO first. before u press OK. If not all your old channel will be lost

That all , around 20 -30 new channel can be found

Enjoy brother

[WhoIsGad]

Hi Vets;

Wat about the DM500C? could we get the channels?

[gnnbccb]

Nope...
Only for HD models...
JTB....

Hi Vets;

Wat about the DM500C? could we get the channels?

[pool7979]

Hi brother, to tune for the *** new channel , please follow here ( only apply to DM800 HD)
1. press Menu
2. Setup
3. Service Searching
4.Tuner configuration
5. It appear Tunner A ........., Enable. Just press enter n go in
6.For all scan band US ... change them to yes. ( right arrow will do )
7.Only select QAM256 to be Yes
8.Change Scan additional SR from 0000 to 6090 ( one will do )
9. press ok to save changes
10. Exit out to auto scan
11.put clear before scan to NO first. before u press OK. If not all your old channel will be lost

That all , around 20 -30 new channel can be found

Enjoy brother

Hi bro, under the zap back to service before tuner setup, do we set yes or no ? Btw, I noticed some of my channels don't match after scan. Example when I press 555 it gives me channel 559 instead, anyway I can fix this ? Appreciate some help here . Very noob in this . For 800se. Thanks

[goodlands]

Anyone here has Nutune cable tuner? Is the reception better? Mine is Phillips but made in china and the signal rate is very low for beepee elle... Wanted feedback on Nutune before i buy ...

[DBTraitor]

Found a nutune supplier from Taiwan.
I wonder if the quality and QC is much better than a china made product?

???q?l-AFE

[uu161]

give u guys small hints: don't waste time on buyer new tuner for 800hd and 800se because clone tuner are working fine for *PL channel.

[mickyyeow]

Brother, the whole scaning took about 5-7 min
scaning 100% done
exit out
press TV (below the red buttom)
after that press red buttom
all the channels should be the main DB
select the *PL channels and transfer back to st**H** digital

[mickyyeow]

Sorry bro, this only apply to DM800C only not DM800SE

[mickyyeow]

The tuner are fine for Philip, is your antenna cable ( the one from your port to your dreambox)
get an gold platted one, sure better .....

[ultrakiasu]

give u guys small hints: don't waste time on buyer new tuner for 800hd and 800se because clone tuner are working fine for *PL channel.

I got 3 tuner modules extracted from brand new DM800HDse clones, problematic dealing with those half-frequencies, and they either can't received those 8 channel or just 3 channels.
But when I swapped with my spare brand new tuners, without meddle with any setting, the new tuners able to receive those channels with video and audio, no scrambled image.

I conclude, yes, tuner quality play a big part too.