NO CA FOUND/FILE TO BIG FIX

[aristote12000]

FILE To BIG!

Help me
My 800hd Is out
When open Dreamup patched and connect I have this message:
FILE To BIG

?????????

[azir2981]

Is it working for all BL59, BL 62 ETC...
thanks

[Ome Merde]

I've got the same problem over here
no matter what I try, the error is back after every reboot
cable is 100% ok

if I bootup (for the use with dreamup), check "use network" I can access the webif. I can flash an (old) image but it hangs at aprox. 45.70%

I've been busy for 5 days now, I'm fed up with it

regards,
merDe

[Ome Merde]

just fixed it !!

what I did (in my case, old dm800hd (sim1(?))

* download dreamup and secondstage-dm800-69.rar which can be found at the following link : http://www.digital-kaos.co.uk/forums...8/index11.html
* connect the box with the crosslinked serial cable and network
* prepare the connection, switch on the box and wait for the error
* a bootloader was uploaded
* close dreamup, power-off the box
* download optiflash 1.0.6 (google) and make a serial connection
* choose "write bootloader", click "do job", follow instructions
* networkcable must be attached, type the ip-address
* choose in the following screen "secondstage-dm800-69.nfi" (downloaded before)
* afther finished, poweroff box, hold button on the box, poweron
* oi, dhcp is working again
* open browser (IE8 in my case), navigate to image to flash. I choose an old ssl69 image, just for testing. GP2 with ssl69 worked for me, can be downloaded at Multiupload.com - upload your files to multiple file hosting sites!
* flash it by the webinterface
* reboot after finishing and grab yourself a cold one

tomorrow I'll try to update to a more recent image. my five days of agony are over so far


merDe

[mete61]

clone dm800

whats the new dreamup 1334 or is dare a new

[Zepic]

Which version of dreamup do you need?

[Mirfa]

Can anybody help me with this error msg "Error1: no ca found? please

[leppard]

flash bootloader then it will be working

[jokkeri77]

just fixed it !!

what I did (in my case, old dm800hd (sim1(?))

* download dreamup and secondstage-dm800-69.rar which can be found at the following link : http://www.digital-kaos.co.uk/forums...8/index11.html
* connect the box with the crosslinked serial cable and network
* prepare the connection, switch on the box and wait for the error
* a bootloader was uploaded
* close dreamup, power-off the box
* download optiflash 1.0.6 (google) and make a serial connection
* choose "write bootloader", click "do job", follow instructions
* networkcable must be attached, type the ip-address
* choose in the following screen "secondstage-dm800-69.nfi" (downloaded before)
* afther finished, poweroff box, hold button on the box, poweron
* oi, dhcp is working again
* open browser (IE8 in my case), navigate to image to flash. I choose an old ssl69 image, just for testing. GP2 with ssl69 worked for me, can be downloaded at Multiupload.com - upload your files to multiple file hosting sites!
* flash it by the webinterface
* reboot after finishing and grab yourself a cold one

tomorrow I'll try to update to a more recent image. my five days of agony are over so far


merDe

Thanks so much for this!!! It helped me revive my DM800 (it says SIM 2.01 at the back).
I had the CA not found error, and couldn't get various versions of Dreamup to work (the patched version said file too big, and 1.3.3.8 got stuck at "upload complete - waiting for acknowledge".
I tried the "Repair" option in the Optiflash tool, but that didn't work (no CA found error after reboot). But the "Write Boot-loader" option in Optiflash has become my hero, was able to flash the SSL-84b from another site, and after reboot, my old image booted fine (btw also the GP2 5.1 bl69). I think I will need to flash another image at some point, but I'm too tired now after ages of troubleshooting.

Hope this helps someone.

[mrwok]

no ca found dm800se ferrari

Too much Steps on the classic method !
OptiFlasher make it easy for you !


-Run OptiFlasher
-Click Advanced
-Select Port
-Select Model
-Write Bootloader or Repair NO CA Found
-Do Job


regards , yassinov

i try this one lot of time no START 1.8 had no dm800se ferrari suport "NO ca FOUNDDDDDDDDDD"inside

is there on this planet ONE person who explane THE BIG file bug and lot of people have the same shit!!!!!!!!!!!
dm800 is no problem ca no found because rs232 cable is hard flash(you know) and usb is soft shit.
Is the trick "pc-->rs232 cable--adapter-->mini usb-->dm800se?????????????"Make test please i have not this cable.

THE person who makes my dm800se ferrari alive is "The Besttttttttt"

[mrwok]

no ca FOUND dm800se

good job only works with dm800 ----->Dm800se have mini usb no ca found is then hang on BIG FILE SHIT ssl62,ssl69,ssl enz is too BIG is there one people on this planet its TIME to MAKE this BIG bUG for lot of people FINished

TANKS

good job fixed my no ca!!

[bilon]

Hello, I have a problem with my dreambox 800pro with sim210 (clone)
when i try flash my dreambox, dreamup show me message that file is too big, i try to different bootloaders and ssl and still same message file to big, what am I doing wrong??
Maybe someone can tell me what i need to use, second stage loader or bootloader and which one??
Thanks

[cassano82]

Tnx...I hope to solve with this method ... I have the Dreambox Second Stage Loader BUILD # 59

[mide2008]

i have a clone dm800 hd. Pls how can i determine the sim number on my dm. On opening it up i only saw a plain white sim nothing on it.

[checkersceltic]

file to big

hi guys, i have the same problem.
oled display reads no c a found.
so far i have used dreamup then enforcer.

so far i have managed to highlight the flash button but when i try to flash all i get is file to big!!!!!!!

please can anybody help its now been 2 days and about 100 posts read but still cant seem to get a solution
help help help
all the best