Boot to Freestyle Dash with Dashlaunch..?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • roryson
    DK Veteran
    • Mar 2009
    • 694

    #1

    Boot to Freestyle Dash with Dashlaunch..?

    my setup at the moment is, FREEBOOT with XEXMENU in my drive, with XEXMENU i then boot FREESTYLE DASH which in im my External hdd. after i boot into FSD and play a game im sent back to FREEBOOT when im finished with the game, so i have to load FSD again with XEXMENU.
    What i want is FSD on my main HDD and DASHLAUNCH i think so im booted straight to FSD on boot and stay on it. i think on boot there is a way of booting to FREEBOOT if i want to. So, this is what i want but dont know how to do this. Any help people with a guide.. Thankx in advance..
  • AgentD

    #2
    Download dashlaunch and freestyle dash
    Open dashlaunch folder and edit the launch.ini file in notepad
    here's an example

    [QuickLaunchButtons]
    BUT_X = Hdd:\Content\0000000000000000\C0DE9999\00080000\C0 DE99990F586558 (should read C0DE99990F586558 with no spaces, tried to edit but couldn't fix)
    Default = Hdd:\Freestyle\default.xex
    [Settings]
    nxemini = true
    pingpatch = true
    contpatch = true
    fatalfreeze = false
    fatalreboot = false
    dvdexitdash = false
    xblaexitdash = false
    nosysexit = false
    nohud = false
    noupdater = true
    debugout = false
    exchandler = true
    bootdelay = 0x2A
    liveblock = true
    livestrong = false
    remotenxe = false
    hddalive = false
    hddtimer = 210

    remember to save when done


    Copy Freestyle Folder, Installer folder from Dashlaunch and also the launch.ini file to usb drive (I'm assuming you're using a usb drive) and connect to your xbox.

    Copy the contents to your xbox HDD using xex menu ( x button selects drive, y button to select options)
    (Here's how if you're not sure)
    press RB on the xbox controller
    press X
    select Usb0 and push A
    select Freestyle, press Y, select Copy and press A
    Press X, select HDD1 and press A
    Press Y, select Paste and press A

    Press X, select Usb0....... repeat the above steps for installer folder and launch.ini file

    Now to install dashlaunch,

    open the installer folder in your xbox HDD
    run the default.xex
    when it loads press A to install dashlaunch and follow the prompts
    it will apply the settings described in the launch.ini file you edited and any patches if needed
    After it completes press A to shut down
    I dont know if it makes a difference but I tend to unplug the power supply from the console for a few secs
    Plug the power back in, switch on and Freestyle should boot
    Last edited by Guest; 2 February, 2012, 00:28.

    Comment

    • roryson
      DK Veteran
      • Mar 2009
      • 694

      #3
      cool m8, thanks alot. when i launched freestyle from my xbox harddrive before your post freestyle didnt recognise i had a external drive connected and thus wouldnt play games i had on drive. any ideas please..??

      Comment

      • AgentD

        #4
        Go to freestyle settings/content settings/manage game paths
        then add the path to your usb drive games folder. eg usb0:\games
        when you boot up your xbox or return to dash it will scan the folder specified.
        There's also a tab in the settings to do a manual scan.

        Comment

        • roryson
          DK Veteran
          • Mar 2009
          • 694

          #5
          Ahh, my mistake. i had already done this process but when i was running freestyle from my usb drive. so i forgot i had to do this again on the freestyle running from xbox hdd. thanks again m8

          Comment

          • roryson
            DK Veteran
            • Mar 2009
            • 694

            #6
            the settings u sent, are thay what i want to be putting in my .ini file or like u said they are just an example. ive not been using a usb stick, ive been using FTP. Thankx..

            Comment

            • roryson
              DK Veteran
              • Mar 2009
              • 694

              #7
              Also, im not sure what i did but after i shut down my xbox after trying to boot freestyle from my xbox hdd it wouldnt reboot, all i got was the power symbol without the rings flashing, i also didnt get an image on my tv. i tried reboot after reboot with no look, even tried powering up by pressing the eject button.... so i pulled the power and removed all cables on the box and after that it booted fine. any thoughts.??

              Comment

              • AgentD

                #8
                is your console a glitch hack or jtag? sounds a bit like it wasn't glitching properly so the exploit wasn't working.

                Comment

                • cunny
                  V.I.P. Member
                  • Jan 2009
                  • 4915

                  #9
                  Unplug everything. Power lead, usb + HDD. Wait 30 seconds to a minute. Plug the power back in, nothing else.

                  Press eject and see if you get into xell reloaded.

                  If you do it might be best to reflash your nand using the backup img you got sent out.

                  Did your file locations match the path set?

                  Hdd:\Freestyle\default.xex including spelling?

                  once you get it back up. Might be best to format the HDD and start a fresh
                  sigpic

                  "Make it idiot proof and someone will make a better idiot."

                  Comment

                  • roryson
                    DK Veteran
                    • Mar 2009
                    • 694

                    #10
                    i think im using the glitch, running COOLRUNNER.

                    Comment

                    • cunny
                      V.I.P. Member
                      • Jan 2009
                      • 4915

                      #11
                      Yes its glitched.
                      sigpic

                      "Make it idiot proof and someone will make a better idiot."

                      Comment

                      • AgentD

                        #12
                        did I misunderstand? is it booting properly now after replacing the cables?

                        Comment

                        • roryson
                          DK Veteran
                          • Mar 2009
                          • 694

                          #13
                          it seems to be booting ok now m8

                          Comment

                          • roryson
                            DK Veteran
                            • Mar 2009
                            • 694

                            #14
                            in your post about setting up the .ini file you said
                            BUT_X = Hdd:\Content\0000000000000000\C0DE9999\00080000\C0 DE99990F586558
                            is that the right path for me, if not how do i find the right path for Freeboot.?

                            Comment

                            • AgentD

                              #15
                              [QuickLaunchButtons]
                              BUT_X = Hdd:\Content\0000000000000000\C0DE9999\00080000\C0 DE99990F586558
                              Default = Hdd:\Freestyle\default.xex

                              by default freestyle dash will launch on startup or when you return to dashboard from game. As Cunny mentioned make sure the path to the default.xex for freestyle is correct including spelling.

                              If you hold the x button while booting or returning to dash, Xex Menu will launch
                              (C0DE99990F586558 should have no spaces in it, I'm not sure why it appears with a space above)

                              If you hold the right bumper you will go to NXE dash

                              Comment

                              Working...