cloud ibox 2

[lombard]

Is that the image we have to load onto the box m8. Could anybody put something in the sticky for a tut

just download from that link and flash as normal, there is instructions above your post, its a waste of time really as its vix 3.0 build 600 and i find its abit old, waiting for them to send me updated image or someone here make a backup of openpli 4.0 which i think was pre loaded with it, i should have made a backup,

and send Air a message about this as not too impressed with this box so far

[RuberDuck]

This is the full flashing tutorial for the original xp1000 receivers.



p.s while this tutorial is a ViX tutorial ViX do not offer any support for the icloud2 box.

[lombard]

here is another link , its vix 3.0 build 600 , after flashing do a factory reset , i aint bothered setting up the image with this, waiting for newer build or openpl 4.0

https://hotfile.com/dl/254544252/f04ba04/xp1000.7z.html

[protexblue]

here is another link , its vix 3.0 build 600 , after flashing do a factory reset , i aint bothered setting up the image with this, waiting for newer build or openpl 4.0

https://hotfile.com/dl/254544252/f04ba04/xp1000.7z.html

Why not try direct from OpenPLi website

http://downloads.pli-images.org/builds/xp1000/OpenPLi-4.0-beta-xp1000-20131111_usb.zip

[lombard]

Why not try direct from OpenPLi website
http://downloads.pli-images.org/buil...131111_usb.zip

if you looked at my earlier posts i have already tried and they dont work

[protexblue]

if you looked at my earlier posts i have already tried and they dont work

I read your posts. You said it came with openpli 4.0 which you didn't back up. You then said you had tried openpli 3.0. So I presume you've tried openpli 4.0 as well then? If so it doesn't look good if you are having to rely on the seller to patch openpli builds.

[pl1976]

I've just plugged mine in powered on at the back and dead looks like box goosed


Sent from my iPhone using Tapatalk

[digicon]

I think it would be prudent for one of the members on here if they own this receiver to firstly find out the Build of the current loaded OpenPLI 4.0 image from the information page and secondly to download one of the backup plugins from the download servers and do a full backup of the image as is.

Then at least some of you can go back and re-load original OpenPLI 4.0 in case you encounter any problems as we are all witnessing at this present time

[lombard]

I've just plugged mine in powered on at the back and dead looks like box goosed


Sent from my iPhone using Tapatalk

Hi, is that first time plugging in ? or after trying to flash ? also the adapter red led on ?

Thanks

[pl1976]

Just first time plugging in not attempted flash yet. Red light on adapter


Sent from my iPhone using Tapatalk

[lombard]

I think it would be prudent for one of the members on here if they own this receiver to firstly find out the Build of the current loaded OpenPLI 4.0 image from the information page and secondly to download one of the backup plugins from the download servers and do a full backup of the image as is.

Then at least some of you can go back and re-load original OpenPLI 4.0 in case you encounter any problems as we are all witnessing at this present time

spot on, i should have made a backup before trying to flash, she did say will send me link to openpli 4.0 tomorrow and new vix 3.0 build, even the oldest openpli 4.0 don't work, so makes me believe they are patching them

[RuberDuck]

maybe some of you are not aware as these are based on the xp1000 but you can buy the original unit for ?129 in the uk ( ?124 in places ) with free shipping and full warranty and no messing with clone patched images.

[lombard]

Just first time plugging in not attempted flash yet. Red light on adapter


Sent from my iPhone using Tapatalk

doesnt look great, even with bad flash, still get led on front and get bootscreen, try another adapter ? its 3amp output

[RuberDuck]

spot on, i should have made a backup before trying to flash, she did say will send me link to openpli 4.0 tomorrow and new vix 3.0 build, even the oldest openpli 4.0 don't work, so makes me believe they are patching them

They have to be, the originals contain a security board for this very reason.

[pl1976]

Looks as if adapter ok is yours red light aswell ?


Sent from my iPhone using Tapatalk