-
-
any1 got a safe vix image which i can install on my cloud ibox, I tried installing vix 3.0.743 but get blank screen. Also whats the best image out there to use?Comment
-
-
I cannot seem to get picons to load up correctly, they seem to be in the wrong order, also out the 643 picons only 57 get transferred to my usb. any help?
All sorted, turned out my usb was playing up so tried another usb.Last edited by billalahmed; 28 September, 2013, 12:27.Comment
-
Cloud ibox best and stable image download link (FREE download in regular mode)
http://dfiles.eu/files/qevo1ql8l
THE NEW IMAGE (all team image) after ( in general 15-08-2013) use protection by chip v3.2 version and is need upgrade software security chip v3 to version v3.2 (only for v3 chip) for work with new image software.
v1,v2 security chip need hardware upgrade.Last edited by kkkkklaur; 9 October, 2013, 20:39.Comment
-
Used to power the fan clone old phone charger (5v) so not push the limit source is sized and powered fan with two separate wires sticking them through the slot left free box fan will go slow and you will not make noise more and eating less ef cooler can let go non stop.Comment
-
My 2 cents.
Installed every image i can imagine..., now BH 2.0.5 updated to version b with Cccam is working perfectly.
This box just have only one problem....
When you reboot it, sometimes (i don't know when or why), it just outputs a blank screen, but you can see the network leds working fine and the blue light (the remote one), working fine too.
i think it's something about power.
If you have an usb fan or usb stick attached, it only boots up 1 time of 10.
if you don't have anything connected it will boot, but, if it doesn't boot, just switch the unit off, wait a moment a turn it on, in 3 or 4 times it will boot.
when it doesn't boot, i could see this log with putty:
thinking that normally it works fine... i believe that some capacitator is small or something like that, but... i don't have any idea about which can beCode:setenv('prefix', '/usr', 0) setenv('exec_prefix', '/usr', 0) setenv('bindir', '/usr/bin', 0) setenv('sbindir', '/usr/sbin', 0) setenv('libexecdir', '/usr/libexec', 0) setenv('datarootdir', '${prefix}/share', 0) setenv('datadir', '/usr/share', 0) setenv('sysconfdir', '/etc', 0) setenv('sharedstatedir', '/com', 0) setenv('localstatedir', '/var', 0) setenv('libdir', '/usr/lib', 0) setenv('localedir', '${datarootdir}/locale', 0) setenv('prefix', '/usr', 1) setenv('exec_prefix', '/usr', 1) setenv('bindir', '/usr/bin', 1) setenv('sbindir', '/usr/sbin', 1) setenv('libexecdir', '/usr/libexec', 1) setenv('datarootdir', '/usr/share', 1) setenv('datadir', '/usr/share', 1) setenv('sysconfdir', '/etc', 1) setenv('sharedstatedir', '/com', 1) setenv('localstatedir', '/var', 1) setenv('libdir', '/usr/lib', 1) setenv('localedir', '/usr/share/locale', 1) resolve: resolve ${datadir}/enigma2/encoding.conf resolve: -> /usr/share/enigma2/encoding.conf resolve: resolve ${libdir}/enigma2/python resolve: -> /usr/lib/enigma2/python PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser + (8) graphics acceleration manager /dev/fb0: No such file or directory + (9) GFBDC /dev/fb0: No such file or directory framebuffer not available. FATAL: no framebuffer available resolve: resolve ${sysconfdir}/enigma2/settings resolve: -> /etc/enigma2/settings resolve: resolve ${sysconfdir}/enigma2/settings resolve: -> /etc/enigma2/settings resolve: resolve ${sysconfdir}/enigma2/settings resolve: -> /etc/enigma2/settings resolve: resolve ${sysconfdir}/enigma2/settings resolve: -> /etc/enigma2/settings resolve: resolve ${libdir}/enigma2/python/ resolve: -> /usr/lib/enigma2/python/ Segmentation fault
.
Despite of this.. i'm happy with this box xDLast edited by calcu; 30 September, 2013, 08:30.Comment
-
i had about 4 of these, and loaded in openpli 3.0 and not had any issues, image loaded to get full 7 day epg, etc , had them running for 2-3 weeks no crashes or problems at all , i found vix 3.0 would last a day or 2 before crashingComment
-
New updated version of this box hits the market 600mhz bigger quieter fan 1g flash/1g ram v3 chip anyone tried this box yet.Its called cloud ibox 2Comment
-
ATTENTION! update RS232 Cable CABLE IS NOT NULL MODEM cable or RS232 classical.. The dongle is attached to the cable or change the connection pin plugs as prescriptions (VU +) pin failure may damage the STB softwareComment
-
this is the real ferrari cable for VU+ Solo/Duo clone and its corresponding interface
http://s24.postimg.org/dkkzxt6ap/5894Comment
-
This is the pin modification conection for CLOUD IBOX (BCM 7325 chipset) (null-modem cable)to upgrade security chip wihout dongle adapter
pin 2,3,5- PC
pin 6,4,5- Vu+ (CLOUD IBOX)
for use the pack software update search with google and download this...
....security chip update V3.2
(Not use another combination of pins for modify null modem cable for security cip upgraded to v3.2 that damage the receiver software.
UPGRADE v3 to v3.2 is ONLY! for receiver with v3 security chip inside..
For receiver v1 or v2 security chip inside is neeed hardware(not software) upgrade (new upgrade with chip v3.2)
For inexperienced people is reccomended to use software images in the first half of August 2013 and let the receiver as is for now.
Another 3 alternative is
1.DOWNLOAD CLONE VU SOLO Software
search in google window ---- np-ulc---- and in first adress link go to:
Receiver / Clone Boxen/Images/Clone Vu+ Ferrari/Clone Solo
2.search in google window
___Official DE OpenBlackHole BH 1.4____
and use image for your security chip inside (in first link open in google have all version for vusolo Ferrari (cloud ibox)
2. Search and download latest patch images works for with new security upgrade
BlackHole 2.0.6 Ferrari V2/V3 by Toysoft
information is only for educational use and Viewing Pay TV without a valid subscription is illegal
vu-solo-duo-db9-cable-adapter.jpgComment
-
this may sound silly but...
which side of the cable is attached at the pc and which is at receiver?Comment
Comment