How to JTAG a DM500

[mihailovgrad]

dm500

I have got a 500s and the jtag points (see piccie) 1 (TDO) and 7 (TCK) are gubbed
looks like the copper has been lifted of the spots so i cant solder the wires to these two points
is there anywhere else i can use to solder the 2 wires to thanks.

ok i will try too jtag on my dm 500 it work

[kurtis]

Dead 500c

Hi i am new to the site amd i am having problems with my dead 500c.I am getting green power light but not connecting to computer or no picture.
Thanks.

[langkniv]

pinout

what pins on ltp1 is it 11 or 13

[john3volt]

How we can test output voltage on pins? Does anybody knw which values we need to measure? Thannks for any input.

[nuxil]

perfect stuff

I was looking for that !

thanks...

[babis4444]

hello

i have one blackbox dm500 and i nead a blimg file to load a bootloader via jtag. i can't find this file.

is anybode know where could i found this file

thenx

[uglybloke1]

hello all i am trying to jtag a dm500c this is what i get when i try connect



F:\jtagdm500aio\Jtagdm500AIO>jtagdm500 -m dm500 -d philips -e 00:09:34:01:A4:3F

Dreambox Dm500 board initialize
Flash info. : Unknown Unknown
Flash recognize failed. Retry(0xf0, 0x3d45)

F:\jtagdm500aio\Jtagdm500AIO>pause
Press any key to continue . . .

what am i doing wrong

[uglybloke1]

have now been able to get jtag to work i can but sat bootloader in no problem have used mac gen to get cable bling but every time i load that i get no lights after it has finished what im i doing wrong

[Lewie]

Great help. Thanks. Does anybody know if the pin setup on the Jtag is the same as for the Starview.

[kaanserhan]

thanks for your help

[kaanserhan]

i want download jtag data but i need posts

[kaanserhan]

Tested And Working Great, Made 3 Boxes. Better Than "jtag_windows",
But Take's 5-6 Min's,.

hi,

i can not downlaod this file,

can anyone upload it again?

thanks

[emoiv]

New member

Hi,
I'm new in the forum.
Try to repair my DM 500 but doing something wrong.
Will check solutions here.

[gmb45]

Hi,
I'm new in the forum.
Try to repair my DM 500 but doing something wrong.
Will check solutions here.

welcome to dk m8

[klauzz]

Experiment

Not the same model but worth the try, Thanks.