usb loader gx wii version 4.3e

[Keithuk]

I have finally done it. Having more time on my hands yesterday i followed Keiths instructions and got usb loader to work. Thanks to all of you out there for help with this issue i had. Now my next question to you genius out there is this, once i have a game on my external hard drive (which is only a 4 gig memory stick at the moment) can i transfer it from my memory stick to my computer and save the game in a file or something. Thanks in advance

Sorry but you are wasting your time and money using a 4GB USB stick as it won't hold 1 game. Get yourself a mains powered USB external hard drive of at least 100GB and thats in the usb Compatibility List

Oh you can click the Thanks button if a particular reply has helped you out.

[fernlop]

Desperate trying usbloader to work

Tried many times to put usb loader to work. My wii version is 4.3E.
It tries to read the usb stick but returns to wii menu.
Perhaps it could work with the latest usb loader and all the wads in this page.

[Keithuk]

Tried many times to put usb loader to work. My wii version is 4.3E.
It tries to read the usb stick but returns to wii menu.
Perhaps it could work with the latest usb loader and all the wads in this page.

It could be a few things.

First of you can forget a USB stick as they don't hold much.

You don't say how the stick is formatted FAT32, NTFS or WBFS?

Make sure you have d2x v7 final installed with MMM 13.4.

Or Digital Kaos - Downloads - Usbloader gx 2.3 r1128 and d2x v7 with mmm 13.4

[tekk4life]

i installed usb loader channel with ios236

[fernlop]

QUOTE=Keithuk;1474170]It could be a few things.

First of you can forget a USB stick as they don't hold much.

You don't say how the stick is formatted FAT32, NTFS or WBFS?

Make sure you have d2x v7 final installed with MMM 13.4.

Or Digital Kaos - Downloads - Usbloader gx 2.3 r1128 and d2x v7 with mmm 13.4[/QUOTE]

Well, it works now! Only with Usbloader gx 2.3 r1128 and d2x v7 with mmm 13.4.
Ok. I?m using a 16GB stick wbfs. I notice that sometimes wii crashes. Could it be the usb? It's an emtec.
I'm gonna test it some more time. After using for 3/4 hours the wii crashed twice.
Thanks

[Keithuk]

It could be a few things.

First of you can forget a USB stick as they don't hold much.

You don't say how the stick is formatted FAT32, NTFS or WBFS?

Make sure you have d2x v7 final installed with MMM 13.4.

Or Digital Kaos - Downloads - Usbloader gx 2.3 r1128 and d2x v7 with mmm 13.4

Ok. I?m using a 16GB stick wbfs. I notice that sometimes wii crashes. Could it be the usb? It's an emtec.
I'm gonna test it some more time. After using for 3/4 hours the wii crashed twice.

Well as I've said USB sticks aren't ideal for loading games onto as they aren't big enough. You ideally need a mains powered USB HDD something thats compatible USB Compatible List

The thing is if your using a USB stick just to see if it works then ok but get yourself a bigger HDD.

[curkri]

Hi Guys, been looking for a decent guide on how to do this with 4.3e. Will let you know if it works out!

[curkri]

I am trying to setup USB Loader on my Wii 4.3e which already has Homebrew on it.

I have formatted (FAT32) a 2gb wii SD card with Windows 7.

Put the 'Usbloader gx 2.3 r1128 and d2x v7 with mmm for installation' App & Wad folders on the clean SD card.

I used Homebrew to get onto MMM and attempted to install the d2x v7 files but after it runs through all seven of the files it says "Final Status - 7 did not complete."

I have reformatted SD in FAT32 and retried the process but only for the same result.

Not sure where I go from here and I am fairly new to all this wii modding stuff so apologies if I am doing something silly!

[Keithuk]

Welcome to DK.

I am trying to setup USB Loader on my Wii 4.3e which already has Homebrew on it.

I have formatted (FAT32) a 2gb wii SD card with Windows 7.

Put the 'Usbloader gx 2.3 r1128 and d2x v7 with mmm for installation' App & Wad folders on the clean SD card.

I used Homebrew to get onto MMM and attempted to install the d2x v7 files but after it runs through all seven of the files it says "Final Status - 7 did not complete."

I have reformatted SD in FAT32 and retried the process but only for the same result.

Not sure where I go from here and I am fairly new to all this wii modding stuff so apologies if I am doing something silly!

Well if all the 6 wads extracted with WinRAR without any error then that rar file is ok.

If MMM 13.4 doesn't say ok after each wad install make a note of the filename and select those by scrolling down and press the + button which will put a green tick next to that filename. Once you have select the wads that didn't install just press 'A' that will show you a list of all wads selected press 'A' again and watch for bad reports again.

To check if all the wads are in your system then do a sysCheck. You could post that sysCheck report as intructed in that download.

7 didn't complete I'm sure there are only 6 wads in d2x v7 final.

I've installed that d2x v7 final fromhere in mine and everyone installed correctly in one place.

[happy_highlander]

I am trying to setup USB Loader on my Wii 4.3e which already has Homebrew on it.

I have formatted (FAT32) a 2gb wii SD card with Windows 7.

Put the 'Usbloader gx 2.3 r1128 and d2x v7 with mmm for installation' App & Wad folders on the clean SD card.

I used Homebrew to get onto MMM and attempted to install the d2x v7 files but after it runs through all seven of the files it says "Final Status - 7 did not complete."

I have reformatted SD in FAT32 and retried the process but only for the same result.

Not sure where I go from here and I am fairly new to all this wii modding stuff so apologies if I am doing something silly!

I think you better read the instructions file again.....It clearly states reload to ios 236 before installation of d2x

[happy_highlander]

7 didn't complete I'm sure there are only 6 wads in d2x v7 final.

There are only 6 wads in d2x but there are 7 wads in that pack, the seventh wad is the gx forwarder

[curkri]

There is no ios 236, in the 'Load another ios' options (as per the instructions), it goes up to 223 and then jumps to 249. I suspect this is the reason I can't install the wads but without the option to get 236 I am not sure what I can do.

p.s. I definitely have 7 wad files as follows:

IOS245[37]-v7.wad
IOS246[38]-v7.wad
IOS247[53]-v7.wad
IOS248[55]-v7.wad
IOS249[56]-v7.wad
IOS250[57]-v7.wad
IOS251[58]-v7.wad

[Keithuk]

Sorry yes there are 7 wads.

[happy_highlander]

There is no ios 236, in the 'Load another ios' options (as per the instructions), it goes up to 223 and then jumps to 249. I suspect this is the reason I can't install the wads but without the option to get 236 I am not sure what I can do.

p.s. I definitely have 7 wad files as follows:

IOS245[37]-v7.wad
IOS246[38]-v7.wad
IOS247[53]-v7.wad
IOS248[55]-v7.wad
IOS249[56]-v7.wad
IOS250[57]-v7.wad
IOS251[58]-v7.wad

Look in the downloads section, I put an ios 236 wad in there a while back

[curkri]

I downloaded the ios 236 wad file but I am not sure how to install it. I can't use the wad manager it just says "Final Status - 1 did not complete"