Carprog Mcu Reflash Step by step

**5555** · 20th December, 2012, 09:28 PM

Originally Posted by matekhr

Try to connect your wiggler interface directly to LPT port, without any extension cable.
NRST should be OK. Also try VDD on pin2, and GND on pin(s) 4, 6, 8, 10, 12, 14, 16, 18, 20.
Good luck

my problem is that I have lpt direct from your computer, a question What if one of these days to schedule you get the file and I downloaded the software would all be activated?

**briangsm** · 21st December, 2012, 10:19 AM

as this programer be good ?

http://allegro.pl/programator-arm-lp...879877331.html

**5555** · 21st December, 2012, 01:26 PM

no that's not my programmer, my programmer is the one in the photo of the explanation for Audiotek

**briangsm** · 21st December, 2012, 01:40 PM

Ok i understand i too want reflash my carprog this programer be ok?

Sent from my GT-I9001 using Tapatalk

**judor** · 21st December, 2012, 07:20 PM

J-link V8 very good programmer for ARM

**briangsm** · 21st December, 2012, 08:27 PM

Originally Posted by judor

I have Jtag programm- verify O.k .
Carprog after reflash dont connect via usb . DEVICE NOT CONNECTED.

J-link V8 do you try this for programing your carprog and work ok ?

free shipping for JLINK V8 emulator (double BUFFER) ARM emulator-in Other Electronic Components from Electronic Components & Supplies on Aliexpress.com

**judor** · 21st December, 2012, 08:59 PM

My carprog dead CryptoEeprom AT88 .

**briangsm** · 21st December, 2012, 09:10 PM

upss...

I'm sorry

but J-link V8 be ok to programing carprog yes?

**judor** · 21st December, 2012, 09:17 PM

JTAG J-Link V8 ARM prog/debug jlink (1230764503) - Archiwum Allegro
Yes J-link good device for carprog . Wiggler too good .
J link have full log menu + core voltage .

**briangsm** · 21st December, 2012, 09:26 PM

Thus the choice made j link is better more useful than wiggler

nearly the same price

**5555** · 24th December, 2012, 01:56 PM

hi all, thank you very much again for your advice everyone got to relive my old cable with a tower that had and had to fix that and I have a question, does the file that my cable is written and updated is true for vag ecu read? I now do my work well carprog?. Before Speedo had trouble ford, fiat, etc. told me that did not connect. merry Christmas

**5555** · 24th December, 2012, 05:28 PM

hello, again, this does not do testing my cable in a megane 2 and not worked and I take a test with an adapter and I made ***8203;***8203;a9 ye that I have seen all pins good minus uart1 Could anyone tell me that failure is that?

**sattvv** · 25th December, 2012, 06:30 PM

Hello
I have dump for CryptoEeprom AT88
I did some tests but without success
probably wrong configuration and how they know it is a single programmable
Can anyone help me with how to program this chip
I work with BEEPROG programmer
Thank you in advance

**judor** · 25th December, 2012, 10:21 PM

Originally Posted by sattvv

Hello
I have dump for CryptoEeprom AT88
I did some tests but without success
probably wrong configuration and how they know it is a single programmable
Can anyone help me with how to program this chip
I work with BEEPROG programmer
Thank you in advance

Only for DK forum

**ciekawy** · 26th December, 2012, 12:04 AM

Originally Posted by sattvv

Hello
I have dump for CryptoEeprom AT88
I did some tests but without success
probably wrong configuration and how they know it is a single programmable
Can anyone help me with how to program this chip
I work with BEEPROG programmer
Thank you in advance

CryptoEeprom AT88 (replacement) -> 24C04

Will it work I do not know