VVDI PROG

[dorofteius]

Why is Vvdi-prog file, for like astra h cim. vw52 airbag, is smaller when you read-it. Smok jtag, r270, x-prog, upa, etc. Have the entire file.
It replaceses some portions that are all ff, with nothing. So when you use a clear crash programm, it will not work.
And by the way, on vw52 you are missing the connection on PTC3 mates. It won't work without-it.
hc908az60a.

[Astronom]

Hi, everybody. why my VVDIPROG ceased to sitat D80 and D160? Earlier he erased successfully but now can't make it.

[kautuvera]

Hi, everybody. why my VVDIPROG ceased to sitat D80 and D160? Earlier he erased successfully but now can't make it.

Can only D80 and D160 erase
Other numbers are impossible

[Astronom]

At me before VVDI PROG erased D80 and D160 Now can't. I erase now it is R270 But I would like to know why now it is impossible to erase?

[ibratex]

Hello mates i need help in reading mb91f061 kia picanto cluster ...






In have seen the carprog a10 pinouts for this proccessor but i need please using vvdi prog to read



Can you please put dots on my photo using colors of vvdi prog cable ..

Thanks mates

Enviado do meu SM-J320FN atrav?s de Tapatalk

[automotrizVIP]

Hi friend, I need a little help
I've tried reading infideon xc2336-56 = Like the instructions of the equipment (vvdi prog)
But without results.
Does anyone know if it's true if you read it for real ...
Or if I'm grabbing something wrong ...
.................................................. .................................................. ..................................
The programmer gives the reading option pin out ref ok.....
programmer read chip no answer back....
is modulo airbag ford http://www.digital-kaos.co.uk/forums...4B321-CF-CLEAR

If anyone can help me I will be grateful. The correct pin out form.
Example: if you have to put a resistance or pin a pin to make it correct.
I expect an answer
thank you

[Samic]

Hi guys,
Someone are having issues to write into EEPROM Atmel 24C02 ?
Im trying, VVDI Prog read perfect, but to write give me error.
VVDI PROG try to erase and fail.
I was reading and does eeproms have write protection, when is not connected to ground (gnd), if EEPROM are connected to VCC have write protect.
So, there is some way to write into this eeprom?
OBS: I have tried with many voltages.. from 3.0 to 5.0v and nothing.
HEre a link from this eeprom datasheet..
http://www.atmel.com/Images/doc0180.pdf
And the write protected info
"WRITE PROTECT (WP):
The AT24C01A/02/04/08A/16A has a Write Protect pin that
provides hardware data protection. The Write Protect pin allows normal Read/Write
operations when connected to ground (GND).
When the Write Protect pin is connected
to VCC, the write protection feature is enabled and operates as shown in Table 2."

friend,did you try remove IC from the PCB then read by VVDI PROG?

[Samic]

Msd80 81 82 ... is needed when all key lost situation for ISN ... maybe an update also samic
Sent from my SM-G900H using Tapatalk

we will check first and make plan for this.

[ibratex]

@samic please would you give me a bit of your precious time for help in this

http://www.digital-kaos.co.uk/forums....php?p=3003962

Enviado do meu SM-J320FN atrav?s de Tapatalk

[Samic]

Hi Samic,
Motorola HC12D60 1L28M not read, tested on AIRBAG VW62 1T0909605C and Dash Ford Mondeo MK3.

please check the connection,if its secured type need to connect the CLK.

[Samic]

Hi Samic,
Problem is with reading and writing (eep and fls) Motorola mask 1L59W in Audi A6 C6 ELV J518 --->2010. The mask 3L40K reading and writing (eep and fls) without problem, any time.
Problem is only with 1L59W mask. I read and write this mask finally but I tried few times. I tried on 4pcs. ELV and 2 PC and problem is the same.
Please check it and correct.
Thanks,

please ensure the cut off wires and connection all ok.

[Samic]

If they add HC805P18 with read and write i might be interested ..
I made some work on finding the pinout on this MCU So here it is ........................

HC805P18 is old type,maybe will not add.currently working on other types first.

[Samic]

mb91f061 program good work not problem
only not verfy in The first two bytes of every 512 Byte and again not problem
excusme for my bad english

MB91F061 should be verify ok,it work like this:
the data total 64KB,there are 128 small data area(each area memory size 512 bytes)
after you wirte a new dump,if the first 512 area change,VVDI PROG will auto calculate 2 bytes named 'verify data'
about the second 512 area,the first 2 bytes will same as last 'verify data',then this area also auto calculate new 2 bytes to the next area.
so if the write the new dump usually verify failed because of 'verify data'changed.

[Samic]

THE UPDATES ARE SO GOOD.....
But I would like to update ...
NPX PCF7947 433mhz id 46 14PIN IT IS USED IN RENAULT
FLASH 29Fxxx O ECU RENAULT SIRIUS 3132- 3134 - 32N 32x
It's normal

not sure about Renault,will check.29Fxxx will add to VVDI PROG.

[Samic]

Can vvdi prog erase the first two lines in M35080 M35160 (80D0WQ, 160D0wQ) ?

we will add M35080 M35160,maybe within 2 months will support.